Cablu audio Van den Hul The MC Silver MK II 75 Ohm RCA-RCA
With our (now discontinued) highly acclaimed MC - SILVER IT Mk II Coaxial in steady demand since its introduction in 1982, an often heard question was whether it could yield likewise improvements in perceived quality when used as a high frequency link to transport 75 Ohm radio, TV, video and even SPDIF (consumer format) digital audio.
Regarding its extremely high bandwidth (GHz range) and extremely low attenuation it would certainly apply. However, since the characteristic impedance of our MC - SILVER IT Mk II Coaxial is a very constant 60 Ohms we have always advised against such usage: its impedance mismatch in equipment designed for 75 Ohm signal transport would cause transmission quality degrading signal reflections.
We therefore have decided to introduce our MC - SILVER IT Mk II 75 Ohm:
This cable is specially adapted to maximum quality 75 Ohm signal transport as found in SPDIF digital audio (CD to DAC) and radio / TV / video (including home theater) applications. However, since the design of this cable only slightly differs from our (now discontinued) MC - SILVER IT Mk II Coaxial and employs the same high grade materials, the MC - SILVER IT Mk II 75 Ohm is equally well suited to be used in high quality audio applications as a single-ended (unbalanced) interlink as our MC - SILVER IT Mk II Coaxial is.
Also available with RCA type connectors, The MC - SILVER IT Mk II 75 Ohm now fully replaces our discontinued MC - SILVER IT Mk II Coaxial in high quality audio applications as a single-ended (unbalanced) interlink.
With the MC - SILVER IT Mk II 75 Ohm all production handling is done with extreme care and maximum attention is paid to maintain a very constant characteristic impedance along the whole cable as well as in the micro domain to prevent signal reflections even up to very high frequencies.
The centre lead consists of a 19 strand extreme high grade Matched Crystal (MC) extruded OFC with a very high density extruded Matched Crystal (MC) purest silver coating applied in a mechanical processing.
The diameter of this centre conductor is: 1.0 mm. and the cross-section area is 0.597 mm². The centre lead resistance is a remarkably low: 28.7 Ohm/km.
The typical capacitance is: 56 pF/meter.
The insulation between core and shielding is made of Teflon tape in several layers with a typically low relative dielectric constant of 1.4.
The shielding is made of a helical wound very pure silver ribbon with external dimensions 2.5 x 0.05 mm.
An additional braiding made of 192 x 0.10 mm. Matched Crystal (MC) OFC wires with a very dense coating of very pure silver is used.
The external insulation is made of a special type of HULLIFLEX ®, i.e. HULLIFLEX ® EHD. This specific insulation material is too costly to be used in all our products.
The frequency range is flat to minimal 15 GHz and within 0.92 dB/meter attenuation even up to 21 GHz. And even at 25 GHz the attenuation is just 1.04 dB/meter.
The working temperature ranges from -100 to +80 °C (-148 to +176 °F).
Precaution must be taken to prevent bending over a very small radius. The minimum safe value of the bending radius is 70 mm.
The external diameter of the MC - SILVER IT Mk II 75 Ohm is: 7.0 mm.; a size that perfectly matches our C - 7.3 RCA type and BNC - 7.0 BNC type connectors.
Product category: audio video - 75 Ohm; interconnect - Unbalanced, Digital; Video
Design purpose: Highest quality level 75 Ohm HF applications, SPDIF digital interconnect and high quality audio applications
Eff conductor: Core: 0.597 mm² / Core: AWG 19.4 / Core: 19; Screen: 192 + Ag tape
Resistance:Core: 2.87 Ohm/100 m.; Screen: 0.770 Ohm/100 m.
Capacitance: 56 pF/m.
Connector types: Our BNC type BNC - 7.0 and our RCA type C - 7.3; The latter two custom mountable on any ordered length.
Standard sales units: Single packed in luxe wooden box with RCA or BNC (unbalanced) connectors in 0.6, 0.8, 1.0, 1.2 and 1.5 m. lengths; Other lengths: please consult your van den Hul dealer or the van den Hul distributor in your country.