Specificatii:


Amplifier:

Power, both channels driven @ 1% THD: 60 Watts per channel into 8 Ohms; 100W into 4 ohms; 140W peaks into 2 ohms;
Power, both channels driven @ 0.09% THD, 20Hz to 20 kHz: 50 Watts per channel into 8 Ohms; 80W into 4 ohms;
Voltage 21 Volts RMS, 20Hz to 20 kHz; onset of clipping;
30 Volts peak to peak
Current 8 Amps peak to peak;
Damping factor 30;
Output devices 1 pair per channel;

Line input:
THD+N < 0.02 % typical, 20Hz to 20 kHz;
Signal / noise ratio > 100dB ‘A’-weighted;
Input impedance 47k Ohms;
Frequency response +0, –3dB, 10Hz to 30 kHz;

Phono input:
Sensitivity (nominal): 5mV (suitable for cartridges giving 1.5mV or more including high output MC types);
Signal / noise ratio: >70dB ‘A’-weighted;
Input impedance: 47k Ohms;
Input capacitance: <100pF;
Gain: 42dB;
Frequency response: RIAA/IEC ±1dB, 20Hz to 20 kHz;

Connections:
Line level inputs 3 pairs line level RCA connectors;
MM phono input;
Optical, coaxial, ARC digital inputs (up to 24bit/192kHz stereo PCM);
Bluetooth 5.1 input;
1 pair line level RCA connectors, preamp outputs for e.g. bi-amping;
Speaker outputs 1 pair 4mm banana plug/binding posts;

Power requirement:
Mains voltages 115/230VAC 50/60Hz (factory pre-set);
100VAC 50/60Hz (alternative);
Consumption 280 Watts maximum;

Weight:
Unit only, unboxed 7.2 kg;
In shipping carton 8.9 kg;

Dimensions:
Wide 430 mm;
High, including feet 90 mm;
Deep (front to back) including terminals 324 mm.